Chassis:

• 2004 F550 Reg. Cab 4x4 Ford
• Ford (F1) Red
• Limited Slip Rear End
• 6.0L V8 Power Stroke Diesel Engine
• Bench Seat
• 5 – Speed Automatic
• Limited Slip Rear End
• Air Conditioning
• 60” CA
• Spare Tire & Wheel
• Front End Replacement Style Brush Guard with Winch Mount
• Back-up alarm
• 4” Reflective Striping
• Front Skid Plate

Body:

• Painted Ford Red
• Body Surface Area Covered with a Poly Coating
• 9ft Flatbed Body  (Steel)  with Gated FF Platforms108” Long X 96” Wide
• One Aluminum Tool Box 18” x 18”x 60” mounted on drivers side (T Handle )
• One Aluminum Tool Box 18” x 18”x 48” mounted on passenger side (T Handle )
• One Aluminum Tool Basket 12”x 16”x 48” mounted on passenger side tool box
• One Aluminum Tool Basket 12”x 16”x 60” mounted on drivers side tool box
• Under Body Storage Drawer
• Headache Rack Lightbar Mounting
• Rear Mounted Receiver

Electrical:

• 1-Whelen 295HFS100 Siren Amp.
• 2-Whelen 500  Series TIR 6 Red LED Rear Warning
• 2-Whelen 500  Series TIR 6 Amber LED Rear Warning
• 2-Whelen 500 Series TIR 6 Red LED Lower Front Warning
• 1-Whelen TIR 3 Red LED Front Intersectors
• 2-Whelen 500 Series TIR 6 Red LED Rear Side Warning
• 1-Whelen Centurion 3 Rotator Light Bar
• 1-Whelen SA314P Siren Speaker w/mount
• 1-12000#  Electric Winch with Control Cable
• 2-Betts Work Lights Mounted on Headache Rack
• 1-Havis C-800 Console           
• 1-Master Disconnect Switch

Skid:

• 300 gallon Poly Tank with 10 gallon integral foam cell
• Hale HPX 200 BS-18 (60gpm @ 150psi – 110gpm @ 125psi – 190gpm @ 75psi–
• 245gpm@ 45 psi )
• Hannay Electric Hose reel mounted passenger side for  rear deployment
• 150’ of 1” booster hose on Reel
• Hose Tray with  a capacity of 150’ of 1 ½” hose
• 6 Gallon Fuel cell in Poly Housing
• Lighted Control Panel with pressure gauge, throttle, choke, primer, start button
• Brass Water Service Valves
• Two 1” valves for whip lines at front of skid
• Two 8’ X 1” whip lines
• Cascade “Foam Flo” System
• One 1.5” Discharge
• One 1” Tank Fill / Re-Circulate Valve
• One 2.5” Pump to Tank
• One 2.5” Suction Valve