Chassis:

• 2006 F550 Regular Cab 4x4 Ford with XL Trim painted Ford (F1) Red
• 84” CA with 19,000 lb GVWR
• Limited Slip Rear End
• 6.0L V8 Power Stroke Diesel Engine
• Bench Seat
• 110 Amp Alternator
• 5 – Speed Automatic Transmission
• Limited Slip Rear End
• Air Conditioning
• Spare Tire & Wheel
• Front End Replacement Style Brush Guard
• Front mounted Skid Plate
• Back-up alarm
• 4” White Reflective Striping
• Gold Reflective Lettering per Flynn VFD Specs           
• Real Wheel Stainless Steel Wheel Covers
• Black Nerf Bars

Body:

• 11ft Flatbed Body (Aluminum) with Gated FF Platforms132” Long X 96” Wide with Inward Swinging locking gates
• Walkway, FF Platforms, and Rear Step to be non skid
• One Aluminum Tool Box 84”L x 24”H x 20”D mounted on drivers side with double lift doors & gas shocks with two adjustable shelves
• One Aluminum Tool Box 72”L x 24”H x 20”D mounted on passenger side with double lift doors & gas shocks  with two adjustable shelves
• One Aluminum Tool Basket 12”x 16”x 72” mounted on passenger side Tool Box
• Headache Rack Lightbar Mounting
• Rear Tow Hooks
• Rear mounted Trailer Receiver Tube
• Four Compartment Lights  
• Headache Rack & Light Bar Mounting & Light Bar Guard
• Four Ziamatic KD-UH-7-SF-CRS SCBA brackets mounted in left rear compartment

Electrical:

• 1-Whelen 295HF100 Siren Amp.
• 2-Whelen 500 Series TIR 6 Red LED Rear Warning
• 2-Whelen 500 Series TIR 6 Amber LED Rear Warning
• 2-Whelen 500 Series TIR 6 Red LED Lower Front Warning
• 1-Whelen TIR 3 Red LED Front Intersectors
• 2-Whelen 500 Series TIR 6 Red LED Rear Side Warning
• 1-Whelen Liberty 8 LED Light Bar
• 1-Whelen SA314P Siren Speakers w/mounts
• 1-Whelen TAL85 LED Traffic Advisor rear mounted
• 1-Havis C-800 Console           
• 1-Master Disconnect Switch
• 2-Streamlight SL20XPLED mounted on console
• 1-Back-up alarm
• 1-Mile Marker 12,000# Hydraulic Winch with Controller
• 2-Havis KR-SB-236-W2-S 120V HID top raise pole scene lights
• Provide & Install one Gen-Pro GPN65EH Generator with Honda Engine & 6000 watts continuous duty & provide 120V Sub Panel and Duplex Outlet
• Fire Com Intercom System with four headsets

Skid:

• 400 gallon Low Profile Poly Tank with 10 Gallon integral Foam Cell & Lifetime Warranty
• Hale HPX 200-BS18 pump w/ B&S 18 hp. Vanguard V-Twin Gas Engine
• Cascade “Foam-Flo” System
• Dual Hose Tray with Divider, each side having a capacity of 150’ of 1 ½” hose
• 300’ of 1 1/2” double jacket 800 psi test fire hose
• Two Protek 1 ½” Adjustable Gallonage Nozzles with Pistol Grip
• 6 Gallon Fuel cell in Poly Housing
• Control Panel with light, pressure gauge, throttle, choke, primer, start button
• Brass Water Service Valves & Class 1 LED Water Level Indicator
• Hannay Electric Hose Reel mounted for Rear Deployment
• 150’ of 1” 800 psi test Booster Hose and Protek 1” adjustable gallonage nozzle with pistol grip
• Two 1.5” Discharges with 1 ½” valves chrome adapters & caps w/chains
• Two 1” Discharge valves at front of skid for whip lines
• Two 8’ x 1” whip lines with two Protek 1” adjustable gallonage nozzles with pistol grip
• One 1” Tank Fill / Re-Circulate Valve
• One 2.5” Discharge with 2 ½” valve with chrome adapter, cap & chain
• One 2.5” Tank to Pump with Valve
• One 2.5” Suction Valve with chrome swivel adapter, plug & chain
• Two Bumper spray nozzles one mounted on each front bumper corner with electric valves controlled in the cab.
• Class 1 remote LED water level display mounted in walkway between FF platforms, and mini display mounted in cab.
• Three nozzle brackets
• Hydrant spanner set with mounting bracket