Chassis:

• 2005 F450 Reg. Cab 4x4 Ford
• Ford (F1) Red
• Limited Slip Rear End
• 6.8L V10 Triton Gasoline Engine
• Bench Seat
• 5- Speed Automatic Transmission
• Limited Slip Rear End
• 60” CA
• Spare Tire & Wheel
• Front End Replacement Style Brush Guard with Receiver Tube
• Back-up alarm
• 4” Reflective Striping
• Department Graphics
• Front Skid Plate

Body:

• Painted Ford Red
• Flatbed, Walkway, and Rear Step covered with Line-X non skid
• 9ft Flatbed Body (Steel) with Gated FF Platforms108” Long X 96” Wide
• One Aluminum Tool Box 18” x 18”x 48” mounted on drivers side (T-Handle)
• One Aluminum Tool Box 18” x 18”x 48” mounted on passenger side (T Handle)
• One Aluminum Tool Basket 12”x 16”x 48” mounted on passenger side tool box
• One Aluminum Tool Basket 12”x 16”x 48” mounted on drivers side tool box
• Headache Rack Lightbar Mounting
• Rear Receiver Hitch

Electrical:

• 1-Whelen 295HFS100 Siren Amp.
• 2-Whelen 500 Series TIR 6 Red LED Rear Warning
• 2- Whelen 500 Series TIR 6 Amber LED Rear Warning
• 2-Whelen 500 Series TIR 6 Red LED Lower Front Warning
• 2-Whelen TIR 3 Red LED Front Intersectors
• 2- Whelen 500 Series TIR 6 Red LED Rear Side Warning
• 1-Whelen Centurion 3 Rotator Light Bar
• 1-Whelen SA314P Siren Speaker w/mount
• 2- Betts Flood Lights Mounted on Headache Rack
• 1- Havis C-800 Console
• 1- Master Disconnect Switch
• 1- Warn 9000# Multiport Electric Winch with Wiring at Front & Rear
• 1- Install Customer Supplied Radio & Antenna

Skid:

• 300 gallon Poly Tank with Lifetime Warranty
• Hale HPX 200 BS-18 with Briggs & Stratton 18 HP Engine(60gpm @ 150psi – 110gpm @ 125psi-190gpm @ 75psi– 245gpm@ 45 psi )
• Two Hannay Electric Hose reels one mounted each side for rear deployment
• Each Reel Equipped with 150' of 1” booster hose on Reel and
• Akron #1030 1” nozzle (300' of hose and two nozzles
• Pump Plumbed to Chassis Fuel Tank
• Lighted Control Panel with pressure gauge, throttle, choke, primer, start button
• Brass Water Service Valves
• Two 1” valves for whip lines at front of skid
• Two 8' X 1” whip lines with Two Akron #1030 1” Nozzles
• One 1.5” Discharge with chrome adapter, cap & chain
• One 2.5” Discharge with chrome adapter, cap & chain
• One 1” Tank Fill / Re-Circulate Valve
• One 2.5” Pump to Tank
• One 2.5” Suction Valve