Chassis:

• 2005 F450 Reg. Cab 4x4 Ford with XL Trim
• Dual Rear Wheel
• 16,000 lb GVWR
• Ford F1 Red
• Limited Slip Rear End
• 6.8L V10 Gasoline Engine
• Bench Seat
• 130 Amp Alternator
• Automatic Transmission
• Limited Slip Rear End
• No Air Conditioning
• 60” CA
• Back-up alarm
• Front end replacement with winch mount
• Front Skid Plate

Body:

• 9ft Flatbed Bed Painted Red with Firefighter Platforms & locking gates
• Headache Rack Lightbar Mounting
• 48” x 18” x 18” tool box mounted on passenger side
• 72” x 18” x 18” tool box mounted on driver side
• 48” x 12” x 16” tool basket mounted on passenger side
• 72” x 12” x 16” tool basket mounted on passenger side

Electrical:

• 1- Whelen 295HFS100 Siren Amplifier
• 2- Whelen 500 Series TIR 6 Red LED Rear Warning
• 2- Whelen 500 Series TIR 6 Amber LED Rear Warning
• 2- Whelen TIR 6 Red LED Front Lower Warning
• 2- Whelen TIR 3 Red LED Front Intersectors
• 2- Whelen 500 Series TIR 6 Red LED Rear Side Warning
• 1- Whelen Centurion 3 Rotator Light Bar
• 1- Whelen SA314P Siren Speaker w/mount
• 1- Havis C-800 Console
• 1- Master Disconnect Switch
• 1- 12000 lb. front mounted electric winch

Skid:

• 350 gallon Poly Tank ( Lifetime Warranty)
• Hale HPX 200 BS-18 with 18 HP Briggs & Stratton Engine
• Hannay Electric Hose Reel Mounted for Rear Deployment with 150' of 1” Reel Tex Booster Hose
• Hose Tray with a capacity of 150' of 1 ½ ” hose
• 6 Gallon Fuel cell in Poly Housing
• Lighted Control Panel with pressure gauge, throttle, choke, primer, start button
• Brass Water Service Valves
• One 1.5” Discharge with Valve, chrome adapter, cap & chain
• One 2.5” Discharge with Valve, chrome adapter, cap & chain
• One 1” Tank Fill / Re-Circulate Valve
• One 2.5” Tank to Pump Valve
• One 2.5” Suction Valve with Chrome Swivel Adapter, Plug & Chain
• Two front bumper sprays one mounted each corner with electric valves controlled in the cab