Chassis Specifications

• 2005 F550 Reg. Cab 4x4 Ford
• Ford (F1) Red
• Limited Slip Rear End
• Triton V10 Gasoline Engine
• Bench Seat
• Sliding Rear Window
• 5 – Speed Automatic
• Air Conditioning
• 60” CA
• Solid Color Paint (Ford Red)
• Front End Replacement Style Brush Guard w/Winch Mount
• 12,000 lb. Hydraulic Winch
• Back-up alarm
• 4” Reflective Striping
• Front Skid Plate
• Department Graphics

Body Specifications

• Painted Ford Red
• Body Surface Area Covered with a Poly Coating
• 9ft Flatbed Body 108” Long X 96” Wide (Steel)
• with Gated FF Platforms
• One Aluminum Tool Box 18” x 18”x 48”
• mounted on drivers side (T Handle )
• One Aluminum Tool Box 18” x 18”x 48”
• mounted on passenger side (T Handle )
• One Aluminum Tool Basket 12”x 16”x 48”
• mounted on passenger side tool box
• One Aluminum Tool Basket 12”x 16”x 48”
• mounted on drivers side tool box
• Rear 7' Under Body Storage with Hinged Door & Latch
• Headache Rack Light bar Mounting

Electrical Specifications

• 1- Whelen 295HFS100 Siren Amp.
• 2- Whelen 500 Series TIR 6 Red LED Rear Warning
• 2- Whelen 500 Series TIR 6 Red LED Lower Front Warning
• 2- Whelen TIR 3 Red LED Front Intersectors
• 2- Whelen 500 Series TIR 6 Red LED Rear Side Warning
• 1- Whelen 9M Strobe Light Bar
• 1- Whelen SA314P Siren Speaker w/mount
• 2- Flood Lights Mounted on Headache Rack
• 2- Flood Lights Mounted on Body
• 2-Flood Lights Mounted on Brush Guard
• 1-Havis C-800 Console
• 1-Master Disconnect Switch
• 2-Streamlight rechargeable flashlights

Skid Unit Specifications

• 400 gallon Poly Tank
• 10 gallon Integral Foam Cell
• Hale HPX 100 (15gpm @ 275psi – 65gpm @ 200psi –
• 100gpm @ 150psi–155gpm@ 50 psi )
• 2-Hannay Electric Hose reels mounted one each side
• for rear deployment
• 150' of 1” Light weight Reel-Tex booster hose on one reel with
• 1” adjustable gallonage nozzle
• Hose Tray with a capacity of 150' of 1 ½” hose
• 6 Gallon Fuel cell in Poly Housing
• Control Panel with pressure gauge, throttle, choke, primer,
• & start button
• Cascade Foam Flo System
• Brass Water Service Valves
• Two 1” valves for whip lines at front of skid
• Two 8' X 1” whip lines with 1” adjustable gallonage nozzles
• One 1.5” Discharge
• One 1.5” Tank Fill / Re-Circulate Valve
• One 2.5” Discharge with Cap & Chain
• One 2.5” Pump to Tank
• One 2.5” Suction Valve