Chassis:

• 2005 F450 Reg. Cab 4x4 Ford
• Ford Red Solid Color Paint
• Limited Slip Rear End
• V-10 Gasoline Engine
• Bench Seat
• 5 – Speed Automatic
• Air Conditioning
• 60” CA
• Front End Replacement Style Brush Guard for Winch
• Back-up alarm
• 4” Reflective Striping
• Front Skid Plate
• Department Graphics
• Step Bars Black (Nerf Bar)

Body:

• Painted Ford Red
• Body Surface Area Covered with a Black Poly Coating
• 9ft Flatbed Body (Steel) w/FF Gated Platforms 108” Long X 96” Wide
• One Aluminum Tool Box 18” x 18” x 72” mounted on drivers side
• One Aluminum Tool Box 20”D” x 30”T x 48”L mounted on passenger side
• One Aluminum Tool Basket 12” x 18”T x 72” mounted on drivers side tool box
• One Aluminum Storage Basket 12”T x 36” x 36” mounted on Poly Tank
• Plastic Tile in Compartments
• Headache Rack Lightbar Mounting
• Rear Receiver Hitch w/Electrical & Tow Ring
• Rear “Possum Belly” Underbody Storage

Electrical:

• Whelen 295HFS100 Siren Amplifier
• Whelen 500 Series TIR 6 Red LED Rear Warning
• Whelen 500 Series TIR 6 Amber LED Rear Warning
• 2- Whelen TIR 3 Red LED Front Lower Warning
• Whelen TIR 3 Red LED Front Intersectors
• 2- Whelen 500 Series TIR 6 Red LED Rear Side Warning
• Whelen 9M Strobe Light Bar
• Whelen SA314P Siren Speaker w/mount
• Betts Flood Lights Mounted on Headache Rack
• 1- Havis C-800 Console
• 1- Master Disconnect Switch
• 1- Electric Winch 12000 lb.
• Two Rechargeable Flash Lights SL20XP/LED
• Kenwood TK790HK 100 watt radio with antenna

Skid:

• 300 gallon low- profile Poly Tank / 10 gallon foam cell
• Hale HPX 200 (60gpm @ 150psi – 110gpm @ 125psi – 190gpm @ 75psi–
  245gpm@ 25 psi )
• 1- Hannay Electric Polished Aluminum Hose reel mounted on passenger side for rear deployment
• 150’ of 1” 800 psi test booster hose on one reel with Akron #1030 1” nozzle
• Hose Tray with a capacity of 150’ of 1 ½” hose
• Pump Motor Fuel Line to be plumbed to Chassis Fuel Tank
• Control Panel with pressure gauge, throttle, choke, primer, start button
• Brass Water Service Valves
• Two 1” Valves with 1” x 8’ Whip Lines & Akron #1030 1” Nozzles
• One 1.5” Discharge with chrome adapter, cap & chain
• One 1.0” Tank Fill / Re-Circulate Valve
• One 2.5” Discharge, with chrome adapter, cap & chain
• One 2.5” Tank to Pump Valve
• One 2.5” Suction Valve with chrome swivel adapter, plug, and chain.
• Two 5 gallon pals of “Fire Blockade” Class “A” Foam
• Two Front Spray Nozzles with Electric Valves controlled from the Cab
• Two 10’ Sections of 2.5” Hard Suction & Barrel Strainer