Click on images for enlargements

Chassis:

• 2006 F450 Regular Cab 4x4 Ford with XL Trim painted Ford (White)
• 84” CA with 16,000 lb GVWR
• 6.0L Power Stroke Diesel Engine
• 110 Amp Alternator
• 5 – Speed Automatic Transmission & Limited Slip Rear End
• Air Conditioning
• Spare Tire & Wheel
• Front End Replacement Style Brush Guard with winch mount
• Front mounted Skid Plate
• Back-up alarm
• 4” Blue Reflective Striping & Department Lettering

Body:

• 11ft Flatbed Body (Steel) painted black with Gated FF Platforms132” Long X 96” Wide,
• Walkway, FF Platforms, Flatbed, and Rear Step to have Rhino-Liner non skid material
• One Aluminum Tool Box18t” x 18d” x 60L” mounted on passenger side with drop down door
• One Aluminum Tool Box 18t” x 18d”x 72L” mounted on driver side side with drop down door
• One Aluminum Hose Basket 12”x 36”x 36” mounted on water tank
• One Aluminum Tool Basket 12”t x 16”w x 72”L mounted on drivers side tool box
• One Aluminum Tool Basket 12”t x 16”w x 60”L mounted on passengers side tool box
• Rear Tow Hooks
• Headache Rack Lightbar Mounting

Electrical:

• 1-Whelen 295HFS100 Siren Amp.
• 2-Whelen 5G Series Red LED Rear Warning
• 2-Whelen 5G Series Amber LED Rear Warning
• 2-Whelen 500 TIR 6 Series Red LED Lower Front Warning
• 1-Whelen 5G Red LED Rear Side Warning
• 2-Whelen TIR 3 Red LED Intersector Warning
• 1-Whelen 3 Rotator Delta Lightbar
• 1-Whelen SA314P Siren Speaker w/mount
• 2-Betts Work Lights Mounted on Headache Rack
• 1-Havis C-800 Console
• 1-Master Disconnect Switch
• 1-12,000 lb. Front Mounted Electric Winch
• 1-ICOM 50 Watt Two-Way-Radio

Skid:

• 350 gallon Low Profile Poly Tank with Lifetime Warranty with 10 Gallon Integral Foam Cell
• Hale HPX 200-BS18 with Briggs & Stratton 18 HP Engine
• Hannay Silver Painted Electric Hose Reel Mounted for Rear Deployment
• 150' of 1” 800 psi Booster Hose and Protek 1” adjustable gallonage nozzle with pistol grip
• Aluminum Diamond Plate Hose Tray with a capacity of 150' of 1 ½” hose
• 6 Gallon Fuel cell in Poly Housing
• Lighted Control Panel with pressure gauge, throttle, choke, primer, start button, &
• Class 1 Electronic LED water level Indicator at pump panel & Mini mounted in cab
• Brass Water Service Valves
• Two 1” valves with Two 8' Whip Lines located at front of skid
• Two Protek 1” adjustable gallonage nozzles with pistol grip
• One Protek 1.5” adjustable gallonage nozzle with pistol grip
• One 1.5” Discharge with Valve, chrome adapter, cap & chain
• One 2.5” Discharge with Valve, chrome adapter, cap & chain
• One 1” Tank Fill / Re-Circulate Valve
• One 2.5” Tank to Pump Valve
• One 2.5” Suction Valve with chrome swivel adapter, plug & chain
• Cascade “Foam-Flo” Class A Foam System
• Two Front mounted Bumper Sprays with electric valves controlled from inside the cab