Click on images for enlargements

Chassis_Add_on:

• Back-up alarm
• Front End Replacement Bumper / Brush Guard with winch mount
• Rear Replacement Renegade Bumper with receiver tube
• 4” White Reflective Striping, Department Lettering & Chevron on tailgate
• Four Goodyear MTR w/Kevlar LT275/70R18
• Aluminum Headache Rack Lightbar Mounting
• One aluminum tool box on passenger side approximate size of 14” tall x 12” deep x 72” long
• One aluminum mesh tool basket on driver side approximate size 14” tall x 12” deep x 72” long
• Spray on Bed Liner
• One remove-able aluminum rear platform with step

1- Whelen CENCOM Siren controller mounted in-dash with radio re-broadcast
2-Whelen M4 Series Red/Clear LED Lower Front Warning
4-Whelen TIR 3 Red LED Intersector Warning
4-Whelen PAR36 LED warning lights mounted in headache rack
1-Whelen LED Inner Edge
1-Whelen SA315P Siren Speaker w/mount
2-Rear Hide away LED’s in taillights
4-Betts Work Lights, two on headache rack and two at rear of tank
2-Stop Tail Turn lights for rear platform to plug into trailer light harness
2-Whelen TIR6 red/amber warning lights on rear of platform
1-Kenwood 50 watt radio with antenna, coax, & connector
1-FireCom System to include 210 Intercom System, radio interface, two wireless headsets with chargers and base
1-Warn 12,000# front mounted electric winch
1-Havis 2411 console in place of center seat section to include arm rest

Skid:

• 250 gallon Poly Water Tank / 10 Gallon Foam Cell with Lifetime Warranty
• Hale HPX200-B18 with Briggs & Stratton 18 HP Gasoline Engine wired to chassis electrical
• Hannay Electric Hose Reel Mounted on Poly Tank with 150’ of 1” Booster Hose
• Plumb pump to chassis if possible or provide 6 Gallon Fuel cell in Poly Housing
• Lighted Control Panel with pressure gauge, throttle, choke, primer, start button, Class One Electronic Tank Level Gauge
• Auxiliary control panel in cab to include start, stop, throttle, psi gauge, & mini tank level gauge
• Brass Water Service Valves / Steel Block Manifold
• One 1.5” Discharge Valve with Chrome Cab & Chain
• One 2.5” Discharge Valve with Chrome Cab & Chain
• One 1” Tank Fill / Re-Circulate Valve
• One 1” Hose Reel Discharge Valve
• One 1” discharge for whip line with swivel
• One 2.5” Tank to Pump Valve
• One 2.5” Suction Valve with chrome swivel adaptor, plug & chain
• One PAC Nozzle Bracket
• Cascade “Foam Flo” Around the Pump
• TFT Tornado Monitor with joystick controls in the cab