Click on images for enlargements

Chassis:

• 2008 Ford F450 Regular Cab 4x4 Ford painted Red
• 60” CA with 16,000 lb GVWR
• Limited Slip Rear End
• 6.8 L V-10 Gasoline Engine
• Bench Seat
• 110 Amp Alternator
• 5-Speed Automatic Transmission
• Limited Slip Rear End
• Air Conditioning
• Front End Replacement Style Brush Guard
• Front mounted Skid Plate
• Back-up alarm
• Spare Tire & Wheel
• 4” White Reflective Striping
• Gold Reflective Department Lettering with Black Outline
• ELM MOTT (arched) FIRE & RESCUE (straight line underneath)
• BRUSH -1 (on front fenders)

Body:

• 9ft Steel Flatbed Body Painted Black with Gated FF Platforms108” Long X 96” Wide, Locking gates to be provided. Walkway, FF Platforms, Flatbed, and Rear Step to have Rhino Liner non skid material
• One Aluminum Tool Box 30”t x20”d x 48”w with double swing doors mounted passenger side
• One Aluminum Tool Box 18”t x 18”d x 72”L with drop down door mounted on drivers side
• One Aluminum Mesh Tool Basket 12”t x 16”w x 72”l mounted on drivers side tool box
• Turtle Tile in each compartment
• Headache Rack Lightbar Mounting
• Light Bar Protection
• Rear Tow Hooks

2-Whelen 500 TIR6 Series Red LED Rear Warning
2-Whelen 500 TIR6 Series Amber LED Rear Warning
2-Whelen 500 TIR 6 Series Red LED Lower Front Warning
1-Whelen 500 TIR6 Red LED Rear Side Warning
2-Whelen TIR 3 Red LED Intersector Warning
1-Whelen 295HFSL1 Siren Amplifier
1-Whelen Delta Rotating Light Bar R/C/R
2-Whelen SA314P Siren Speaker w/mount
2-Betts 12 Volt Work Lights Mounted on Headache Rack
1-Havis C800 Console
1-Master Disconnect Switch
1-Whelen HD Switch Box
1-Relm 50 Watt Two Way Radio

Skid:

• 300 gallon Poly Tank with 10 Gallon Foam Cell
• Hale HPX 200-B18 with Briggs & Stratton 18 HP Engine (250 Max. GPM or 165 Max. Pressure)
• Hannay Painted Black Electric Hose Reel Mounted for Rear Deployment on Passenger Side
• 150’ of 1” booster hose.
• Pump Motor Fuel Plumbed to Chassis Fuel Source
• Lighted Control Panel with pressure gauge, throttle, choke, primer, start button, & Class 1 Electronic LED water level Indicator
• Brass Water Service Valves
• Two 1” valves with Two 8’ x 1” Whip Lines located at front of skid
• One 1.5” Discharge with Valve, chrome adapter, cap & chain
• One 2.5” Discharge with Valve, chrome adapter, cap & chain
• One 1” Tank Fill / Re-Circulate Valve
• One 2.5” Tank to Pump Valve
• One 2.5” Suction Valve with chrome swivel adapter, plug & chain
• One Aluminum Hose Tray with capacity to hold 150’ of 1.5” Hose
• Three 1” TFT Twist Style Nozzles
• Cascade Class “A” Foam System