Click on images for enlargements

Chassis:

• 2009 F350 Reg Cab 60 CA-Single Rear Wheel 4x4 with XL Trim Package
• Limited Slip Rear End 4.10 Ratio withElectronic Shift on the Fly 4 x 4
• 10,600 lb GVWR
• Bench Seat Vinyl
• V-10 Gasoline Engine
• 130 Alternator
• 5 – Speed Automatic Transmission
• Air Conditioning
• Front End Replacement Style Brush Guard with 2” Receiver for 9000 lb Winch
• Back-up alarm
• 4” Suspension Lift
• Custom Tires and Wheel

Body:

• 9ft Aluminum Flatbed Body with Gated FF Platforms 108” Long X 88” Wide, with, Locking Gates Rear Step / Two Fold Down Steps to be provided
• One Aluminum Tool Box 18t” x 18d”x 72L” mounted on driver side
• One Aluminum Tool Box 18t” x 18d”x 48L” mounted on passenger side
• One Aluminum Mesh Basket 12t’ x 16w” x 72L” mounted on drivers side tool box
• One Aluminum Mesh Basket 12t”x 16w” x 48L” mounted on passenger side tool box
• One Aluminum Hose Tray to have capacity to carry 150’ of 1.5” hose, drivers side
• Headache Rack Lightbar Mounting with Lightbar Protection
• Two Rear Frame Mounted Tow Hooks & 2” Rear Receiver Tube
• One Rear Underbody Storage Compartment

1-Whelen HF295SLSA6 Siren Amplifier & Switch Control
2-Whelen 500 TIR6 Red/ Amber LED Upper Rear Warning
2-Whelen 700 Super Red/ Amber LED Inboard Lower Rear Warning
2-Whelen 500 TIR6 Series LED Lower Front Warning
2-Whelen 500 TIR 6 Red Rear Side Warning
2-Whelen TIR3 Red Front LED Intersector Warning
1-Whelen 55” Justice 14 LED Red with 2 Amber Rear
1-Whelen SA315P Siren Speaker w/mount
1-Havis C-800 Console
1-Warn 9000lb Winch with Cradle and Electrical Connection Front & Rear
2-Two Kwik Raze 12 Volt HID Telescoping Pole mounted to Bulk-Head at walkway
4-Betts 12 Volt Flood Lights (2) mounted on headache rack & (2) mounted at rear of tank

Skid:

• 225 gallon Poly Tank with Lifetime Warranty with 10 Gallon Integral Foam Cell
• Hale HPX 200 BS 18 HP / Fuel Line Plumbed to Chassis Fuel Source
• Cascade Around the Pump Foam System
• One Hannay Polished Aluminum Electric Hose Reel Mounted for Rear Deployment
• Lighted Control Panel with pressure gauge, throttle, choke, primer, start button, hose reel rewind button, & Class 1 Intelli-tank 4 light Electronic water level Indicator & Mini water level mounted in the cab
• Walkway Mounted Pump Control Panel
• One 1.5” Discharges with Valves, chrome adapter, cap & chain
• One 1” Tank Fill / Re-Circulate Valve
• Two 1” Discharge valves for whip lines located at front of skid
• One 2.5” Tank to Pump Valve
• One 2.5” Suction Valve with chrome swivel adapter, plug & chain
• Two Front Bumper mounted ground spray nozzles with electric valves with controls in the cab
• Three Nozzle Mounting Brackets
• Three 1” Protek #361 Pistol Grip Nozzles
• 200’ of 1” Boost Lite Booster Hose
• Two 1” x 8’ Whip Lines