Click on images for enlargements

Chassis:

• 2010 Ford Crew Cab, 4x4, Ford Red
• 60” CA with 15,000 lb GVWR
• Limited Slip Rear End
• 6.4L Diesel
• Front 40/20/40 Split
• 200 Amp Alternator
• 6-Speed Automatic Transmission
• Limited Slip Rear End
• Air Conditioning
• Front End Replacement Brush Guard with winch mount
• Back-up alarm
• Spare Tire & Wheel
• 4” Reflective Striping
• Department Reflective Lettering
• Rear Chevron

Body:

• 9ft Steel Flatbed Body Painted (Red)108”L x 96”W with Gated FF Platforms, Wide, Locking gates to be provided. Walkway, FF Platforms, Flatbed, and Rear Step to have Rhino Liner non skid material
• One Aluminum Tool Box 18”t x 18”d x 48”w with drop down door mounted on passenger side
• One Aluminum Tool Box 24”t x 20”d x 72”L with double lift up doors, mounted on driver’s side
• One Aluminum Mesh Tool Basket 12”t x 16”d x 72”L mounted on driver’s side tool box
• One Aluminum Mesh Tool basket 12”t x 16”d x 48” L mounted on passengers side tool box
• One Aluminum Mesh Tool Basket 12”H x 36”x 36” mounted on top of tank
• Turtle Tile in each compartment
• Rear Underbody Storage with drop down door
• Headache Rack Lightbar Mounting
• Rear Tow Hooks

2-Whelen M4 Series Red / Amber Split LED Rear Warning
2-Whelen M4 Series Red LED Lower Front Warning
2-Whelen 500 TIR6 Red LED Rear Side Warning
2-Whelen 500 TIR6 Red LED Mid Ship Side Warning
2-Whelen TIR3 Red LED Intersector Warning
1-Whelen 55” Liberty 14 LEDs, Front Work Lights & Alleys
1-Whelen 295 HFSA6 Siren Amplifier & Switch Control
1-Whelen SA315P Siren Speaker w/mount
4-Whelen LED Compartment Lights
1-Kussmaul Battery Charging System with Auto Ejecting plug
2-Betts 12 Volt Work Lights Mounted on Headache Rack
2-Betts 12 Volt Work Lights Mounted at Rear of Tank
1-Havis C2411 Console
1-Master Disconnect Switch
2-Stream Light Rechargeable Flash Lights
1-Warn Tabor 12,000 lb Electric Winch
2-Havis HID 12 Volt telescoping flood lights mounted in walkway
1-Install customer Supplied Radio
1-Fire Com Wireless 4 stations, two inside, two outside and 3 head sets

Skid:

• 300 gallon Poly Tank with 10 Gallon Foam Cell
• Hale HPX 200-B18 with Briggs & Stratton 18 HP Gasoline Engine(250 Maximum GPM or 165 Maximum Pressure)
• Hannay Painted Electric Hose Reel Mounted for Rear Deployment on Passengers Side with 150’ of 1” booster hose
• Lighted Control Panel with pressure gauge, throttle, choke, primer, start button, & Class 1 Electronic LED water level Indicator and Mini Tank Level in the Cab
• Brass Water Service Valves & Block Manifold
• Two 1” valves with Two 8’ x 1” Whip Lines located at front of skid
• One 1.5” Discharge with Valve, chrome adapter, cap & chain
• One 2.5” Discharge with Valve, chrome adapter, cap & chain
• One 1” Tank Fill / Re-Circulate Valve
• One 2.5” Tank to Pump Valve
• One 2.5” Suction Valve with chrome swivel adapter, plug & chain
• One Hose Tray with capacity to hold 150’ of 1.5” Hose
• Three 1” Pistol Grip Adjustable Gallonage Nozzle
• One 1.5” Pistol Grip Adjustable Gallonage Nozzle
• 150’ of 1.5” Fire Hose
• Cascade “Foam Flo” Class “A” Foam System
• Two Ground Spray Nozzles with electric valves and in cab controls
• One Hydrant and Spanner Wrench Set