Click on images for enlargements

Chassis:

• 2008 Dodge Ram DMOL43 4WD Regular Cab 164.5” WB 60” CA, Flame Red (R4) in color
• 6.7L Cummins Turbo Diesel Engine
• 6 – Speed Automatic Transmission with Anti-Spin Differential Axle & 4.88 Axle Ratio
• 225/70R19.5F All Traction Tires with Full Size Spare Tire & Wheel
• Air Conditioning
• 220 Amp Alternator
• 52 Gallon Fuel Tank
• Heavy Duty Front Springs
• Transfer Case Skid Plate Shield
• Steel Front Bumper Replacement Brush Guard with Receiver Tube for Winch
• Back-up alarm
• 4” White Reflective Striping & Department Lettering

Body:

• 9ft Flatbed Aluminum Body 108” Long X 96” Wide with Gated FF Platforms & Locking gates One Aluminum Tool Box 30”t x20”d x 48”w with double swing doors mounted passenger side
• One Aluminum Tool Box 18”t x 18”d x 72”w with single drop door mounted driver side One Aluminum Mesh Tool Basket 12 x 16 x 72
• Turtle Tile in each compartment
• Headache Rack Lightbar Mounting
• Rear Tow Hooks & Rear Receiver Tube
• Chevron Striping on Rear of Body

2-Whelen 500 TIR6 Series Red LED Rear Warning
2-Whelen 500 TIR6 Series Amber LED Rear Warning
2-Whelen 500 TIR 6 Series Red LED Lower Front Warning
1-Whelen 500 TIR6 Red LED Rear Side Warning
2-Whelen TIR 3 Red LED Intersector Warning
1-Whelen 295HFSLA6 Siren Amplifier & Switch Controls
1-Whelen 56” Justice LED Light Bar
2-Whelen SA315P Siren Speaker w/mount
2-Betts 12 Volt Work Lights Mounted on Headache Rack
1-Havis C2411 Console
1-Master Disconnect Switch
2-Havis 12V HID Telescoping lights mounted in the walkway
1-Warn 12000# Multi Mount winch with wiring at both the front and the rear of the truck

Skid:

• 350 gallon Poly Tank with Life Time Warranty
• Hale HPX 100-B18 with Briggs & Stratton 18 HP Gasoline Engine (100 GPM @ 150 Pressure)
• Hannay Aluminum Hose Reel Mounted for Rear Deployment on Passenger Side with 150’ of 1” booster hose
• Lighted Control Panel with pressure gauge, throttle, choke, primer, start button, & Class 1 Electronic LED water level Indicator & Mini Tank Level in Cab
• Brass Water Service Valves
• Two 1” valves with Two 8’ x 1” Whip Lines located at front of skid
• One 1.5” Discharge with Valve, chrome adapter, cap & chain
• One 1” Tank Fill / Re-Circulate Valve
• One 2.5” Tank to Pump Valve
• One 2.5” Suction Valve with chrome swivel adapter, plug & chain
• One Aluminum Hose Tray
• Three 1” Protek Pistol Grip Nozzles
• Three Nozzle Mounting Brackets
• Cascade Class Foam System
• TFT Tornado Bumper Turret with Joystick Control in the Cab
• Two Front Corner Mounted Bumper Sprays with Electric Valves controlled by individual switches in the cab