Click on images for enlargements

Chassis:

• 2009 Ford F550 Regular Cab 4x4 Ford painted Oxford White
• 60” CA with 19,000 lb GVWR
• V-10 Gasoline with 110 Amp Alternator
• Bench Seat
• 5-Speed Automatic Transmission
• Limited Slip Rear End / 4.10 Axle Ratio
• Air Conditioning
• Front End Replacement Style Brush Guard with receiver tube
• Back-up alarm
• Spare Tire & Wheel
• 4” Reflective Striping & Department Graphics to be Blue

Body:

• 9ft Steel Flatbed Body painted Oxford White with Gated FF Platforms108” Long X 96” Wide, Locking gates to be provided and rear step
• Light bar cage protection
• One Aluminum Tool Box 30”t x20”d x 48”w with double swing doors, mounted on passenger side
• One Aluminum Tool Box 18”t x 18”d x 72”L with drop down door mounted on drivers side
• One Aluminum Mesh Tool Basket 12”t x 16”w x 72”L mounted on drivers side tool box
• Turtle Tile in each compartment
• Headache Rack Lightbar Mounting
• Rear Tow Hooks to chassis frame

2-Whelen M4K Series Red / Amber LED Rear Warning
2-Whelen 500 TIR 6 Series Red LED Lower Front Warning
2-Whelen 500 TIR6 Red LED Rear Side Warning
2-Whelen TIR 3 Red LED Intersector Warning
1-Whelen 56” Justice16 LED Lightbar with CEN-COM Siren & Switch Control Mounted in Dash
1-Whelen SA315P Siren Speaker w/mount
2-Betts 12 Volt Work Lights Mounted on Headache Rack
2-Betts 12 Volt Work Lights Mounted at rear pump area
1-Master Disconnect Switch
1-Install Customer Supplied radio

Skid:

• 400 gallon Poly Tank & Life Time Warranty with 10 Gallon Foam Cell
• Cascade “Foam Flo” class “A” foam system
• Hale HPX 200-B18 with Briggs 18 HP Gasoline Engine with Guzzler Primer
• Hannay Painted Electric Hose Reel Mounted for Rear Deployment on Passenger Side with 100’ of 1” booster hose.
• Pump Fuel plumbed to chassis fuel source
• Lighted Control Panel with pressure gauge, throttle, choke, primer, start button, & Class 1 Electronic LED water level Indicator and Mini Tank Level in the Cab
• Brass Water Service Valves
• Two 1” valves with Two 8’ x 1” Whip Lines located at front of skid
• One 1.5” Discharge with Valves, chrome adapter, cap & chain
• One 1” Tank Fill / Re-Circulate Valve
• One 2.5” Tank to Pump Valve
• One 2.5” Suction Valve with chrome swivel adapter, plug & chain
• One Hose Tray with capacity to hold 150’ of 1.5” Hose
• Three 1” TFT 1040 Twister Nozzles
• Three Nozzle Mounting Brackets