

|
BRUSHTRUCK Gallery : WILDFIRE 2007 Peoria VFD Peoria, TX BRUSHTRUCK
 |
 |
 |
 |
Peoria VFD Peoria, TX |
 |
 |
 |
 |
| Click on images for enlargements |
Chassis:
- 2007 Ford F450 Regular Cab with XL Trim
- 16,000 lb GVWR
- 4X4 with Limited Slip Rear End
- 6.8L V10 Triton Gasoline Engine
- 115 Amp Alternator
- 5 – Speed Automatic Transmission
- Air Conditioning
- 60” CA
- Front End Replacement Style Brush Guard with receiver tube
- Front mounted Skid Plate
- Back-up alarm
- 4” Reflective Striping & Department Lettering
Body:
- 9ft Flatbed Body (Steel) painted red with Gated FF Platforms108” Long X 96” Wide, Locking gates
- Walkway, FF Platforms, Flatbed, and Rear Step to have Line-X non skid material
- One Aluminum Tool Box 30t” x 20d”x 48L” mounted on passenger side
- One Aluminum Tool Box 18t” x 18d”x 72L” mounted on driver side
- One Aluminum Mesh Basket 12”x 16”x 72L” mounted on driver side tool box
- Turtle Tile in Compartments
- Headache Rack Lightbar Mounting and Lightbar/Worklight Cage
- Two Rear Tow Hooks & Rear Receiver Tube attached to Chassis Frame
- Custom Rear Platform with Locking gate at same height as bed
Electrical:
- 1 - Whelen 295HFSL1 Siren Amplifier
- 2 - Whelen 500 TIR 6 Series Red LED Rear Warning
- 2 - Whelen 500 TIR 6 Series Amber LED Rear Warning
- 2 - Whelen 500 TIR 6 Series Red LED Lower Front Warning
- 2 - Whelen 500 TIR 6 Red Rear Side Warning
- 2 - Whelen 500 TIR 6 Red Intersector Warning
- 1 - Whelen Delta 3 Rotator Light Bar R/C/R
- 1 - Whelen SA314P Siren Speaker w/mount
- 2 - Betts Work Lights Mounted on Headache Rack in Lightbar cage
- 1 - Havis C-800 Console
- 1 - Master Disconnect Switch
- 1 - Warn 9000 lb. Multi Mount Electric Winch with wiring to front and rear of truck
- 1 - Kenwood TK7160 50 watt VHF radio with antenna, coax, & connector
Skid:
- 350 gallon Poly Tank / 10 gallon foam cell with Lifetime Warranty
- Hale HPX 200 with BS 18 HP Engine
- Painted Hannay Electric Hose Reel, mounted on passenger side rear
- 150’ of 1” Booster Hose and TFT D104 Twister nozzle
- Aluminum Diamond Plate Hose Tray with a capacity of 150’ of 1 ½” hose
- Pump plumbed to the chassis fuel tank
- Lighted Control Panel with pressure gauge, throttle, choke, primer, start button, and Class 1 LED Water tank level indicator
- Mini tank level display in Cab, and remote tank level display in walkway
- Remote pump panel in walkway with start and stop buttons, pressure gauge, and throttle control
- Brass Water Service Valves
- Two 1” valves with Two 8’ Whip Lines with TFT D1040 Twist shut off nozzles
- One 1.5” Discharge with Valve, chrome adapter, cap & chain
- One 1” Tank Fill / Re-Circulate Valve
- One 2.5” Discharge with Valve, chrome adapter, cap & chain
- One 2.5” Tank to Pump Valve
- One 2.5” Suction Valve with chrome swivel adapter, plug & chain
- Cascade Class “A” Foam System
- Two front corner mounted bumper spray nozzles with electric valves controlled in the cab
|
For more information please call 1-888-452-2701 or e-mail us at info@wildfiretruck.com .
We look forward to helping you design your next brushtruck.
|
|
 |
 |
 |
 |
|
|
 |