Click on images for enlargements

Chassis:

• 2010 Ford F550 Regular Cab 4x4 Ford with XL Trim
• 84” CA with 19,500 lb GVWR
• 6.7L V-10 Gasoline with 110 Amp Alternator
• Bucket Seats
• 5 – Speed Automatic Transmission with Limited Slip Rear End
• Air Conditioning
• Front End Replacement Style Brush Guard with Warn 12000 lb front mounted electric winch
• Back-up alarm
• 4” White Reflective Striping & Department Lettering

Body:

• 11ft Flatbed Body Aluminum, 132” Long X 96” Wide, with rear step and headache rack for light bar mounting. Gated FF platform with locking gates
• One Aluminum Tool Box 18t” x 18d” x 60L” mounted on passenger side with drop down door
• One Aluminum Tool Box 18”t x 18”d x 72”L mounted on passenger side with drop down door
• One Aluminum Mesh Tool Basket 12”t x16”d x 60”L mounted on passenger side compartment
• One Aluminum Mesh Tool Basket 12”t x 16”d x 72”L mounted on driver side compartment
• Rear Tow Hooks to chassis frame rails
• Turtle Tile shall be in each compartment and hose tray

2-Whelen 500 TIR6 Series Red LED Rear Warning Lower
2-Whelen 500 TIR6 Series Amber LED Rear Warning Lower
2-Whelen 500 TIR 6 Series Red LED Lower Front Warning
2-Whelen 500 TIR6 Red LED Rear Side Warning
2-Whelen TIR 3 Red LED Intersector Warning
1-Whelen 295SLA6 Siren Amplifier & Switch Box
1-Whelen 56” Justice 16 LED Light Bar with Takedown Lights
1-Whelen SA315P Siren Speaker w/mount
4- Betts 12 V Flood Work Lights 2-Mounted on Headache Rack & 2 mounted at rear of tank
4-Whelen LED Compartment Lights / Switched from cap switch box
1- Havis C2411 Console with Master Disconnect Switch
1- Kussmaul Auto Eject Charging System

Skid:

• 500 gallon Poly Tank with Lifetime Warranty with 10 gallon Foam Cell
• Hale HPX 200-B18 with Briggs 18 HP Gasoline Engine
• Hannay Polished Aluminum Electric Hose Reel Mounted for Rear Deployment
• 200’ of 1” Light Weight Booster Hose & Protek 361 pistol grip nozzle for booster reel
• Six Gallon Fuel Cell
• Lighted Control Panel with pressure gauge, throttle, choke, primer, start button, & Class 1 Electronic LED water level Indicator / Mini tank level in cab
• Brass Water Service Valves with Steel Block Manifold Victaulic couplings
• Two 1” discharge valves at walkway with 8’ X 1” whip lines and Protek 1” pistol grip adjustable gallonage nozzles
• One 1.5” Discharge with Valve, chrome adapter, cap & chain with 90 degree turndown
• One 2.5” Discharge with Valve, chrome adapter, cap & chain
• One 1” Tank Fill / Re-Circulate Valve
• One 2.5” Tank to Pump Valve
• One 2.5” Suction Valve with chrome swivel adapter, plug & chain
• Cascade “Foam Flo” Class A Foam System
• One spanner hydrant wrench set
• Two front corner mounted bumper sprays with electric valves controlled in the cab
• One TFT “Tornado” Turret Mounted on front bumper with in cab joy stick controls