Click on images for enlargements

Chassis:

• 2010 Ford F750 Regular Cab, 4 x 4, 84CA, & 33,000 GVWR
• Cummins 300 HP Diesel with 200 Amp Leece Neville & Engine Block Heater
• 5 Speed Allison 2500 EVS Automatic Transmission
• Air Brakes, Air Horn, & Air Conditioning
• 45 Gallon Fuel Tank
• Six Michelin 11R22.5 XDE M/S tires
• 4” Reflective Striping & Department Graphics
• Stainless Steel Wheel Inserts with valve stem extensions
• Custom Heavy Duty Extended Brush Guard with Winch Mount

Body:

• 12ft Steel Flatbed Body with Gated FF Platforms 144” Long X 96” Wide Painted Ford Red
• Flatbed body, FF Platforms, Walkway, and Rear Step covered with Rhino Liner non skid material
• One Aluminum Tool Box 18”t x 18”d x 72”L mounted on passenger side with drop down door
• One Aluminum Tool Box 30”t x 20”dx 84”L mounted on driver side with Lift Up Double Doors
• One Aluminum Tool Basket 12”t x 16”dx 72”L mounted on Passenger side tool box
• Rear Underbody Storage with Drop Door, between frame rails
• Headache Rack Lightbar Mounting
• Rear Tow Hooks to chassis frame rails
• Four Cable Steps

1-Whelen 295SLSA6 Siren Amplifier with Switch Control
2-Whelen 500 Series TIR 6 Red LED Rear Warning
2-Whelen 500 Series TIR 6 Amber LED Rear Warning
2-Whelen 700 Series Red LED Lower Front Warning
2-Whelen 500 TIR 6 Red LED Front Intersectors
2-Whelen 500 Series TIR 6 Red LED Rear Side Warning
2-Underbody Ground Lights
1-Whelen Liberty 14 LED Light Bar
1-Whelen SA315P Siren Speaker w/mount
6-Betts Work Two Lights Mounted on Headache Rack, Two mounted at Rear of Tank and Two on front bumper
1-Havis Console with Master Disconnect Switch
1-Back-up alarm
8-LED Compartment Lights and 2-LED Step lights at platforms
2-Streamlight SL20XP/LED rechargeable Flashlights Mounted in cab
1-Kussmaul 091-56-12-S-KIT charger with Super Auto Eject
2-Kwik Raze Telescoping 12V HID Mounted Walkway to Bulkhead
1-Warn 16,500# Front Mounted Electric Winch
1-Kenwood 50 Watt Radio

Skid:

• 750 gallon Poly Tank with 10 gallon integral foam cell (Lifetime Warranty)
• Hale HPX 200-B26 with 26HP Briggs Diesel / Plumped to chassis fuel source
• 1-Hannay Electric Hose reel mounted passenger side for rear deployment with 200’ of 1” 800 psi booster hose
• And Protek #361 adjustable gallonage nozzle
• Hose Tray with a capacity of 150’ of 1¾” fire hose mounted on driver side tool box
• 6 Gallon Fuel cell in Poly Housing
• Lighted Control Panel with pressure gauge, throttle, choke, primer, start button
• Brass Water Service Valves / Block Manifold
• Two 1” valves for whip lines at front of skid with two 8’ X 1” whip lines & Two Protek #361 nozzles
• Cascade Class “A” Foam System
• One 1” Discharge for Forestry hose
• One 1.5” Discharge with Chrome Adapter, Cap & Chain
• One 2.5” Discharge with Chrome Adapter, Cap & Chain
• One 1” Tank Fill / Re-Circulate Valve
• One 2.5” Tank to pump Valve
• One 2.5” Suction Valve with Chrome Swivel Adapter, Plug & Chain
• Class 1 Water Level Indicator, with Master Display at pump controls, and Mini Display in Cab
• Walkway Mounted Control Panel with Tank level, Start, Stop, Throttle, Panel Light & Gauge
• One TFT Front Mounted Bumper Monitor with in Cap Monitor Controls
• Front Bumper Ground Spray Nozzles with in cab controls
• Three PAC nozzle brackets
• One- Hydrant Wrench Set